3 Wall-Mounted Sensor Urinals Compared: Flush Controls and Installation

A sensor does not tell you what the fixture needs to operate. Compare the urinal body, flush control, water supply, and power requirements for three models.

11 min read

Benzafind may earn a commission from purchases through affiliate links, at no additional cost to you.

As an Amazon Associate, Benzafind earns from qualifying purchases.

A sensor urinal is more than a bowl with a motion detector. A useful purchase comparison must separate the fixture body, flush-control sequence, water supply, power arrangement and waste connection. This article covers three exact-ASIN sensor products: the ZGNMK surface-sensor urinal with cleaning sprayer, njxbrek BIV067 and the RTUSUML stainless-steel model.

These listings describe intended use in homes and commercial rooms, but that wording is not proof of code compliance, accessibility approval or suitability for every facility. No independent flush-volume, sensing-reliability, splash, corrosion or odor test was supplied. Utilities below distinguish exact-ASIN listing statements from missing information; no other model’s specifications are substituted.

Comparison at a glance

Seller-stated values and source illustrations; measurements use the reference points stated below. Compare the key differences below; model-specific specifications and purchase checks follow.

Selected urinal / ASINBody / dimensional evidenceSensor operationDistinguishing featureInstallation information to verify
ZGNMK Surface-Sensor Urinal with Cleaning Sprayer
B0GVM7MQ96
Wall-mounted; surface-sensor variantInfrared-triggered waterfall-style flushIntegrated handheld cleaning sprayerPower/pressure/inlet not established; sprayer shown
njxbrek BIV067 Stainless-Steel Sensor Urinal
B0G39FH1VL
Size conflict: 11.81 in field / 8.86 in artworkAutomatic approach/departure flush descriptionAutomatic drain-core seal describedPower/pressure not established; weight conflict retained below
RTUSUML 304 Stainless-Steel Sensor Urinal
B0GKV6RLV3
Wall-mounted; 12.6 in outer basin diameter claimedInfrared range 11.8–31.5 in claimed3-second pre-rinse + 6-second main flush claimedDC 6V / AC 220V; four AA noted; 0.1–0.6 MPa

ZGNMK Surface-Sensor Urinal with Cleaning Sprayer

ASIN: B0GVM7MQ96

ZGNMK Surface-Sensor Urinal with Cleaning Sprayer — ZGNMK Surface-Sensor Urinal with Cleaning Sprayer — original selected-ASIN listing photograph.
ZGNMK Surface-Sensor Urinal with Cleaning Sprayer — original selected-ASIN listing photograph.

Model-specific specifications

Identity
ZGNMK; raw model field TRVTBHDRH-94991254
Selected configuration
Surface-mounted sensor; integrated cleaning sprayer
Operation
Seller describes infrared automatic flushing and waterfall-style outlet
Illustrated size
Gallery labels 66 cm overall height (about 26 in) and 28 cm upper width; other spans require drawing
Listed weight
22 lb
Source anomaly
Package dimensions field says 0.39 × 0.39 × 0.39 in; not used as fixture dimensions
Power supply
Not established in the saved exact-ASIN source; no battery or mains rating confirmed.
Water supply
Rated pressure, inlet size and supply rough-in not established.
Flush valve / control
Infrared automatic flushing described; valve model, electrical rating, flush volume and itemized valve inclusion not established.
Accessories
Integrated cleaning sprayer and coiled hose shown for this variant; seller claims installation components without an itemized list.
View on Amazon
ZGNMK Surface-Sensor Urinal with Cleaning Sprayer — ZGNMK selected-ASIN close-up of the cleaning sprayer and coiled hose.
ZGNMK selected-ASIN close-up of the cleaning sprayer and coiled hose.

The cleaning sprayer is separate from the automatic flush

This selected variant combines an infrared-triggered urinal with a handheld cleaning sprayer shown on a coiled hose. The intended convenience is reaching the bowl during cleaning without relying entirely on the automatic outlet. That does not establish that the sprayer can be used to wash a floor safely or that it removes all stains, despite the seller’s broad language. The water supply, isolation and any backflow requirements must follow the actual installation documentation and site assessment.

ZGNMK Surface-Sensor Urinal with Cleaning Sprayer — ZGNMK source illustration of infrared activation; sensing reliability and water use were not tested.
ZGNMK source illustration of infrared activation; sensing reliability and water use were not tested.

Automatic operation is described, consumption is not quantified

The seller describes infrared sensing and a waterfall-style flush. The supplied evidence does not state a tested activation distance, reliable trigger rate, gallons per flush or a comparison against a defined manual valve. Therefore, no percentage water saving or hygiene improvement is established. Odor-shielding and clog-resistance claims also do not prove an odor-free installation or eliminate maintenance. Check: obtain the sensor’s power requirements, flush timing/volume and supported water-pressure range for B0GVM7MQ96 before specifying it for a commercial room.

ZGNMK Surface-Sensor Urinal with Cleaning Sprayer — Selected ZGNMK sizing artwork; illustrated spans do not replace a supply-and-waste rough-in drawing.
Selected ZGNMK sizing artwork; illustrated spans do not replace a supply-and-waste rough-in drawing.

Obtain a usable rough-in drawing

The gallery labels a 66 cm height and several other spans, but it does not fully establish the supply and waste connection positions. The structured package field’s 0.39-inch cube is not a usable fixture measurement. Its source image appears glazed, while the feature text merely calls the body heavy-duty material; confirm the actual material rather than assigning ceramic solely by appearance. A claim that installation components are included is not a complete bill of materials. This model is a conditional option when the sprayer is useful and a supplier can document the exact fixture, sensor and connection package.

Source: ZGNMK Surface-Sensor Urinal with Cleaning Sprayer listing, B0GVM7MQ96.

njxbrek BIV067 Stainless-Steel Sensor Urinal

ASIN: B0G39FH1VL

njxbrek BIV067 Stainless-Steel Sensor Urinal — njxbrek BIV067 Stainless-Steel Sensor Urinal — original selected-ASIN listing photograph.
njxbrek BIV067 Stainless-Steel Sensor Urinal — original selected-ASIN listing photograph.

Model-specific specifications

Identity
njxbrek; raw model field BIV067
Outer dimensions field
Structured: 11.81 × 11.61 × 20.28 in; gallery: 8.86 × 11.61 × 20.28 in
Listed weight
Structured: 19.84 lb; gallery: 17.86 lb (8.1 kg)
Body description
Stainless-steel title; seller gallery claims brushed 304 steel; not independently verified
Flush behavior
Seller describes detection on approach and departure
Drain feature
Automatic core described as opening during use and closing afterward
Package
One automatic sensor urinal
Power supply
Not established in the saved exact-ASIN source; no battery or mains rating confirmed.
Water supply
Rated pressure, inlet size and supply/waste rough-in not established.
Flush valve / control
Approach/departure sensing described; valve model, power rating and flush volume not established. The automatic drain core is a separate waste-side feature.
Accessories
Package field lists one automatic sensor urinal; separate valve, power parts and mounting hardware are not itemized.
View on Amazon
njxbrek BIV067 Stainless-Steel Sensor Urinal — njxbrek source illustration of the automatic drain core; odor prevention is a seller claim.
njxbrek source illustration of the automatic drain core; odor prevention is a seller claim.

Automatic flushing and an automatic drain core are different functions

The BIV067 source describes approach/departure sensing that triggers flushing. It separately describes an automatic drain core that releases water and closes afterward. That is an intended odor-control mechanism; it does not establish that every installation will be odor-free or remove the need to follow the specified waste connection. The source does not quantify the trigger distance, delay or volume per flush. Check: obtain the exact sensor sequence, power arrangement and drain-core service instructions for B0G39FH1VL. Its sensor artwork labels a two-second pre-flush and six-to-seven-second exit flush; the supplied feature text does not independently elaborate those timings.

njxbrek BIV067 Stainless-Steel Sensor Urinal — njxbrek gallery claims brushed 304 stainless steel; no grade test record was supplied.
njxbrek gallery claims brushed 304 stainless steel; no grade test record was supplied.

A wall-hung steel body with untested splash claims

The title describes stainless steel and a silver finish. Its own gallery explicitly claims brushed 304 steel, although that grade is not stated in the feature text and has not been independently verified. This is a claim on this ASIN’s artwork, not a specification borrowed from RTUSUML. A deepened bowl is presented as a way to reduce splashing, but the source provides no controlled splash test or common comparison with the other urinals. Wall mounting removes the fixture’s floor contact; actual ease of cleaning depends on the installed waste connection, adjacent finishes and the room layout.

njxbrek BIV067 Stainless-Steel Sensor Urinal — njxbrek sizing graphic conflicts with the structured dimensions and empty-weight fields.
njxbrek sizing graphic conflicts with the structured dimensions and empty-weight fields.

Verify the dimensional axes and mounting package

Source conflict: the structured dimensions are 11.81 × 11.61 × 20.28 inches, but the gallery gives 8.86 × 11.61 × 20.28 inches. The structured weight is 19.84 pounds while the graphic says 17.86 pounds (8.1 kg). Confirm the outer projection, dimensional axes and actual mounting load before planning the wall. The package field lists one automatic sensor urinal, without every valve or power component. Check the pressure range, connector sizes, required parts and exact rough-in together. BIV067 is a conditional option for the automatic drain-core concept only when those model-specific conflicts can be resolved.

Source: njxbrek BIV067 Stainless-Steel Sensor Urinal listing, B0G39FH1VL.

RTUSUML 304 Stainless-Steel Sensor Urinal

ASIN: B0GKV6RLV3

RTUSUML 304 Stainless-Steel Sensor Urinal — RTUSUML 304 Stainless-Steel Sensor Urinal — original selected-ASIN listing photograph.
RTUSUML 304 Stainless-Steel Sensor Urinal — original selected-ASIN listing photograph.

Model-specific specifications

Identity
RTUSUML; raw model field “urinals for men”; no unique model number supplied
Body
Seller specifies brushed 304-grade stainless steel
Sensing distance
11.8–31.5 in, in feature text
Flush timing
Three-second pre-rinse and six-second main flush, in feature text
Basin / outlet
12.6 in outer basin diameter; 1.57 in drainage outlet, seller claims
Package
Urinal, drainage pipe, English installation manual, bilingual user manual and assembly accessories
Power supply
Saved description: DC 6V, AC 220V. Notes require four AA batteries to power the sensor; confirm the supplied power configuration and any AC adapter. Battery/adapter inclusion is not established.
Water supply
Saved description: applicable water pressure 0.1–0.6 MPa. Inlet size and supply rough-in are not established.
Flush valve / control
Automatic infrared control; stated three-second pre-rinse and six-second main flush. Separate valve model, valve package and gallons per flush are not established.
Installation limits
Complete outer dimensions, mounting centers and utility connections still require an exact-model drawing.
View on Amazon
RTUSUML 304 Stainless-Steel Sensor Urinal — RTUSUML original gallery illustration labels the 11.81–31.5-inch sensing range.
RTUSUML original gallery illustration labels the 11.81–31.5-inch sensing range.

A more explicit timing description, without a flow measurement

RTUSUML specifies an infrared sensing range of 11.8–31.5 inches, a three-second pre-rinse and a six-second main flush. Those stated timings help a buyer understand the intended operating sequence. They do not establish gallons per flush: volume also depends on the valve and supply conditions. No percentage saving can be calculated from time alone. The saved description lists DC 6V and AC 220V, while its notes tell the buyer to provide four AA batteries for the sensor and suggest replacement about every six months. That is a seller maintenance estimate, not a tested battery life. Confirm which power configuration is actually supplied; the text does not establish automatic dual-power operation, a supplied adapter or 110/120V mains compatibility. Applicable water pressure is stated as 0.1–0.6 MPa; the inlet size and supply centers still need the exact drawing.

RTUSUML 304 Stainless-Steel Sensor Urinal — RTUSUML selected-ASIN source view; material grade and anti-splash claims remain seller specifications.
RTUSUML selected-ASIN source view; material grade and anti-splash claims remain seller specifications.

The material grade belongs to this ASIN only

The feature text names brushed 304-grade stainless steel, along with a deep elliptical basin, 12.6-inch outer basin diameter and 1.57-inch drainage outlet with a seven-hole grille. These are seller-stated construction details, not independently verified corrosion, impact or vandal-resistance results. The “splash-free” wording also exceeds what an untested bowl illustration can prove. njxbrek’s separate gallery also claims brushed 304 steel; that remains artwork evidence for its own ASIN, rather than a transferred RTUSUML specification. The text calls the 12.6-inch measure an outer diameter, while the picture labels outer width; obtain the full elliptical-basin dimensions rather than treating it as a circular bowl.

RTUSUML 304 Stainless-Steel Sensor Urinal — RTUSUML source detail shows mounting holes, the seven-port drain structure and the claimed 1.57-inch outlet.
RTUSUML source detail shows mounting holes, the seven-port drain structure and the claimed 1.57-inch outlet.

A listed pipe is not a complete installation specification

The package field lists the urinal, drainage pipe, installation/user manuals and other assembly accessories. The saved electrical and pressure statements above do not itemize a supplied AC adapter, batteries or a separate water-side flush valve. The drainage pipe is a waste-side accessory, not proof of an included supply valve. The 12.6-inch basin diameter also is not a full width-by-projection-by-height drawing. Obtain the overall envelope, mounting-hole positions and waste/supply centers before comparing installation fit. RTUSUML is a conditional choice for buyers who value its more explicit sensor-timing description and can verify the remaining utilities and dimensional requirements. It has not been proven the most economical or durable unit in this group.

Source: RTUSUML 304 Stainless-Steel Sensor Urinal listing, B0GKV6RLV3.

Buying guidance and FAQs

Confirm the complete assembly before comparing appearance

A bowl-only listing and a complete sensor-flush package are different purchases. These selected sources describe automatic sensing, but their component lists vary in detail. ZGNMK shows its integrated sprayer and coiled hose; RTUSUML lists a drainage pipe, manuals and assembly accessories; njxbrek’s package field lists one automatic sensor urinal. None itemizes a separate flush-valve model or confirms all power-supply parts. Obtain an itemized carton list including required flush-control, mounting, water and power parts rather than assuming that everything in a staged image is included.

Flush time is not gallons per flush

RTUSUML supplies nominal pre-rinse and main-flush timings. njxbrek shows timing claims in its gallery, while ZGNMK does not establish a comparable numerical sequence. None supplies a verified common consumption measurement under defined pressure. Without flow or tested volume, a shorter flush time does not prove lower water use. Likewise, sensor distance is not a tested reliability rating in a room with particular traffic, reflections and lighting.

Match the rough-in and maintenance access to the site

RTUSUML’s saved description states DC 6V / AC 220V and 0.1–0.6 MPa; its notes separately specify four AA batteries. ZGNMK and njxbrek do not establish equivalent power or pressure ratings. For each ASIN, obtain the exact supply/waste centers, inlet sizes, supplied power parts and access to serviceable components. Sensor control, a water-side flush valve and a waste-side drain core are distinct items; do not infer a complete valve package from automatic-flush wording. A wall-mounted fixture can clear floor space, but an unsuitable trap or outlet layout can still complicate installation and cleaning. The body dimensions must also be reliable: njxbrek’s gallery conflicts with its structured size and weight fields, while ZGNMK’s package dimensions are not credible fixture measurements.

Buyer FAQs: does stainless steel prevent odors, and does a sensor establish commercial compliance?

A material description does not establish odor control; the drainage arrangement, seals, maintenance and installed plumbing all matter. Automatic drain-core or anti-clog language is a seller description, not a guarantee. Similarly, a “commercial” title does not document an applicable listing, certification or accessibility assessment. Ask for project-specific compliance documentation and a complete model manual before specifying any of these units for a public facility.

Choosing for your project

ZGNMK is the conditional option when a separate cleaning sprayer is useful; njxbrek offers a described automatic drain core but has material size and weight conflicts to resolve. RTUSUML gives explicit flush timing plus saved electrical and pressure statements, while the actual supplied power configuration, consumption and full installation envelope still need confirmation. Choose only after the actual utilities, component package and rough-in are documented. The evidence supports different design choices, not an overall water-saving or durability winner.