3 Best Cordless Brad Nailers for Trim and Small Projects

Already have a compatible battery, or starting from scratch? Compare two bare cordless brad nailers with a kit that includes a battery and charger.

6 min read

Benzafind may earn a commission from purchases through affiliate links, at no additional cost to you.

The best cordless brad nailers for trim fit the brads you use and the battery setup you want to maintain. The DEWALT and CRAFTSMAN options here are sold as bare tools. The WEN kit includes a battery and charger. First check which package gets you ready to work, then compare the depth controls, nail sizes, and visibility features that matter to your projects.

Compare picks by buyer need

Your priorityOur pickWhy consider it
Compact nose and tool-free depth adjustmentDEWALT DCN680B 20V MAX XR Brad NailerAn 18-gauge bare tool with a compact nose, work lights, and tool-free depth adjustment.
Bare tool for an existing V20 battery setupCRAFTSMAN CMCN618B V20 Brad NailerA cordless 18-gauge V20 tool with tool-free jam and stall access.
Battery and charger includedWEN 20512 Cordless 18-Gauge Brad Nailer KitAn 18-gauge kit with a 2.0 Ah battery, charger, and a stated range of 3/4-inch to 2-inch brads.

DEWALT DCN680B 20V MAX XR Brad Nailer

Product overview — B06XF6MZJ5
Product overview — B06XF6MZJ5 — Listing illustration.

The DCN680B uses a compact nose and work lights to help you see where the brad will go. That matters near an edge or corner where a larger nose could obscure the mark.

DEWALT lists tool-free depth adjustment and a selector for sequential or contact actuation. Consult the instructions for the appropriate setting and check the depth on scrap before working on visible trim.

The tool includes jam and stall-release mechanisms and low-nail lockout. Check the manual for the correct procedure when the driver stops or a fastener jams.

This is the bare-tool package, so buyers need a compatible DEWALT battery and charger separately.

Key specifications: DEWALT DCN680B 20V MAX XR Brad Nailer
ModelDCN680B
Included accessories(1) DCN680 – Brad nailer
Feature100% battery powered. Eliminates the hassle of using gas, compressor, and hose
FeatureBrushless motor maximizes runtime and durability
FeatureTool-free depth adjustment for precise countersinking of nails
ASINB06XF6MZJ5

Pros

  • Compact nose and LEDs help illuminate the placement area.
  • Tool-free depth adjustment and jam release.

Cons

  • The bare-tool package requires a separately available battery and charger.

Before you buy: Confirm the supported brad lengths and battery compatibility for the exact model.

Who should choose it?

Choose it if you own a compatible DEWALT battery and value nose visibility and depth adjustment for trim.

View on Amazon

CRAFTSMAN CMCN618B V20 Brad Nailer

Product overview — B0BZQXGXDN
Product overview — B0BZQXGXDN — Listing illustration.

The CMCN618B is a bare 18-gauge nailer for the CRAFTSMAN V20 platform. If you already use compatible V20 equipment, check that your battery and charger are approved for this model before ordering.

Its cordless design removes the air hose from small trim jobs. Think about where you will stage the tool when moving between pieces, and whether your existing pack fits the balance you want.

CRAFTSMAN lists tool-free jam and stall controls. The practical benefit is access when the driver stops, with the correct clearing procedure still governed by the model instructions.

The package is a bare tool, so budget separately for power if you are new to the platform.

Key specifications: CRAFTSMAN CMCN618B V20 Brad Nailer
ModelCMCN618B
Included accessories(1) CMCN618 18 Ga. Cordless Brad Nailer Battery and Charger Sold Separately
FeaturePowerful motor: drives up to 420 nails per charge**
FeatureNo need for compressors: fully cordless design eliminates the need for compressors, hoses, and costly gas cartridges
FeatureFor various conditions: provides firing power in various climate conditions or materials
ASINB0BZQXGXDN

Pros

  • Tool-free jam and stall controls.
  • Works without an air hose or compressor.

Cons

  • Battery and charger are separate from this bare tool.

Before you buy: Confirm the exact brad length range and the battery options approved for this model.

Who should choose it?

Choose it for trim work if you already use compatible CRAFTSMAN V20 batteries.

View on Amazon

WEN 20512 Cordless 18-Gauge Brad Nailer Kit

Product overview — B0CH3R5G59
Product overview — B0CH3R5G59 — Listing illustration.

The WEN 20512 includes a 2.0 Ah battery and a charger. It is a practical package to compare if you do not already own a battery system for a nailer.

WEN specifies 18-gauge brads from three-quarters of an inch to two inches. Compare this range with the fasteners your trim and backing require.

The magazine is listed at 100 nails, and the supplied package includes 400 brads. Check whether the supplied lengths match the work you have planned before buying additional fasteners.

The status LED reports battery, magazine, and temperature information. That can help identify why a run of fastenings needs attention.

Key specifications: WEN 20512 Cordless 18-Gauge Brad Nailer Kit
Model20512
MaterialMetal
Included accessories20V Max Cordless 18-Gauge Brad Nailer with 2.0Ah Battery and Charger
ColorBlack
FeatureShoot 18-gauge brads ranging from 3/4 to 2 inches in length
ASINB0CH3R5G59

Pros

  • Package includes a 2.0 Ah battery and charger.
  • Lists the fastener range and magazine capacity.

Cons

  • The specified length range ends at two inches.

Before you buy: Check the lengths of the included brads and the compatible battery options for future additions.

Who should choose it?

Choose it if you need a bundled battery and charger and your brad lengths fit the documented range.

View on Amazon

Our recommendations use product specifications and package details, rather than hands-on testing. Manufacturer performance claims are not independent measurements. As an Amazon Associate, Benzafind earns from qualifying purchases.

Best cordless brad nailers by battery package

The DEWALT DCN680B is a 20V MAX bare tool and the CRAFTSMAN CMCN618B is a V20 bare tool. If you already own a matching charger and compatible battery, a bare tool can fit the system you use. Similar voltage labels do not establish cross-brand compatibility. The WEN 20512 package includes a 2.0 Ah battery and charger, so it is an option for buyers starting without either item.

Check brad length against the trim

All three models use 18-gauge brads. The WEN specifies a range of three-quarters of an inch to two inches. Before buying any of these tools, check the listed range for the exact model and the brads you plan to use. When fitting thin molding, consider the trim thickness and backing together, and check the setup on an offcut before working on the finished piece.

Compare visibility and depth controls

The DEWALT has a compact nose, LEDs, and tool-free depth adjustment. Those features can help when you need to see the placement area and set the nail head relative to the trim surface. The WEN uses a status indicator for battery, magazine fill, and temperature. Decide whether you care more about visibility near the work or status information during a series of fastenings.

Plan for reloading and clearing jams

The WEN lists a 100-nail magazine and supplies 400 brads. The CRAFTSMAN and DEWALT list tool-free mechanisms for clearing jams or releasing a stalled driver. For small projects, consider how often you stop to swap material or refill the magazine. Follow the manufacturer's clearing instructions for the model you choose, especially when a brad does not feed as expected.

Choose DEWALT for its specified placement and depth controls if you own a compatible battery, CRAFTSMAN for an existing V20 setup, or WEN if you want the battery and charger in the package.