3 Best Circular Saw Blades for Plywood

The right plywood blade starts with your saw’s supported diameter. Compare two 60-tooth options and a smaller 40-tooth blade before deciding which belongs on your saw.

5 min read

Benzafind may earn a commission from purchases through affiliate links, at no additional cost to you.

The best circular saw blade for plywood fits your saw and the kind of edge you intend to leave. These three options include two 7¼-inch 60-tooth blades and a smaller 6½-inch 40-tooth blade. Choose by the size your saw is designed for, then compare whether you need a dedicated veneer and melamine option or a blade you will also use on other wood.

Compare picks by buyer need

Your priorityOur pickWhy consider it
Dedicated plywood and melamine optionFreud LU79R007 7¼-Inch Plywood and Melamine BladeA 60-tooth 7¼-inch blade with a 5/8-inch arbor and a listed 0.079-inch kerf.
Fine-finish blade for plywood and other woodsWORKPRO W124876AE 7¼-Inch Fine-Finish BladeA 60-tooth circular saw blade with alternating top bevel carbide teeth and a thin-kerf design.
Finish option for a 6½-inch sawDiablo D0641X 6½-Inch 40-Tooth Finish BladeA 40-tooth finish blade with a 5/8-inch arbor and plywood among its intended applications.

Freud LU79R007 7¼-Inch Plywood and Melamine Blade

Product overview — B002IPHGA2
Product overview — B002IPHGA2 — Listing illustration.

Freud lists the LU79R007 for plywood and melamine and documents a high alternate top bevel in its specifications. Consider it if a finished veneer or sheet face is important.

The 7¼-inch diameter and 5/8-inch arbor must fit your saw. The 0.079-inch kerf is a separate dimension to check against the machine guidance.

Test the edge on the same type of sheet before committing to a visible piece. Material and support affect how the edge looks.

Key specifications: Freud LU79R007 7¼-Inch Plywood and Melamine Blade
ModelLU79R007
Listed dimensionsProduct Dimensions: 7.25"L x 7.25"W
MaterialBlend
Included accessoriesUltimate Plywood & Melamine (Thin Kerf) Saw Blade
ColorMulti
ASINB002IPHGA2

Pros

  • Documents arbor size and kerf.
  • Purpose listed for plywood and melamine.

Cons

No specific drawback established.

Before you buy: Confirm the arbor, blade speed and kerf against your saw.

Who should choose it?

Choose it for compatible 7¼-inch saws and plywood or melamine finish cuts.

View on Amazon

WORKPRO W124876AE 7¼-Inch Fine-Finish Blade

Product overview — B0FMYPHWWC
Product overview — B0FMYPHWWC — Listing illustration.

WORKPRO lists plywood, hardwood, softwood, and trim for the W124876AE. This is an option when a compatible 7¼-inch saw sees more than one type of woodworking material.

The teeth use an alternating top bevel. The maker describes the blade as thin kerf, so confirm the exact kerf if the saw or layout requires a specific width.

Before cutting visible sheet material, use a representative offcut to see how the tooth geometry and setup work together.

Key specifications: WORKPRO W124876AE 7¼-Inch Fine-Finish Blade
ModelW124876AE
Listed dimensionsProduct Dimensions: 7.25"L x 7.25"W
MaterialAlloy Steel, Carbide
Included accessoriesCircular Saw Blade
ColorBlack and Red
ASINB0FMYPHWWC

Pros

  • Lists plywood and solid wood applications.
  • 60 carbide-tipped teeth and a documented ATB design.

Cons

No specific drawback established.

Before you buy: Confirm the arbor and exact kerf for the model before purchase.

Who should choose it?

Choose it when your saw uses a 7¼-inch blade and you cut plywood and other wood materials.

View on Amazon

Diablo D0641X 6½-Inch 40-Tooth Finish Blade

Product overview — B0042U2XFO
Product overview — B0042U2XFO — Listing illustration.

The D0641X is listed at 6½ inches, so it applies to a different saw size from the two 7¼-inch blades. Match the saw size before comparing tooth counts.

Diablo describes the blade for crosscuts and rips in plywood, hardwood, and softwood. It lists carbide teeth and a thin kerf.

If you need one blade for several materials, test its finish on a representative offcut of the plywood you will use. Check the arbor and other blade limits for the exact saw.

Key specifications: Diablo D0641X 6½-Inch 40-Tooth Finish Blade
ModelD0641X
Listed dimensionsProduct Dimensions: 6.5"L x 6.5"W
MaterialMetal
Included accessoriesBlades – Other, Circular Saw Blade, Power Tool Accessories
ColorMulti
ASINB0042U2XFO

Pros

  • 6½-inch option with a documented 5/8-inch arbor.
  • Specifically lists plywood among its intended materials.

Cons

No specific drawback established.

Before you buy: Check the 5/8-inch arbor and other saw compatibility requirements.

Who should choose it?

Choose it if you have a compatible 6½-inch saw and want a finish blade for plywood and other woods.

View on Amazon

Our recommendations use product specifications and package details, rather than hands-on testing. Manufacturer performance claims are not independent measurements. As an Amazon Associate, Benzafind earns from qualifying purchases.

Best circular saw blade for plywood by diameter

The Freud LU79R007 and WORKPRO W124876AE are listed at 7¼ inches. The Diablo D0641X is a 6½-inch blade. Start with the saw manual rather than assuming those diameters are interchangeable. Confirm the arbor, speed rating, and the permitted kerf before you buy. Check the approved blade installation and guard clearance for the specific saw.

Match the blade to the face that will show

For a visible veneer, the Freud is marketed as a plywood and melamine blade. Its specifications list a high alternate top bevel and a 0.079-inch kerf. WORKPRO describes the W124876AE as a fine-finish wood blade with alternating top bevel teeth and lists plywood among the applications. Use a piece of the same sheet material to judge the edge before cutting a final panel.

Consider what else you cut

The Diablo D0641X lists crosscuts and rips in hardwood, softwood and plywood. That makes it a candidate for someone using a compatible 6½-inch saw on more than sheet goods. The other two are useful to consider if your saw is designed for a 7¼-inch blade. Compare within the blade size your saw takes rather than picking based on tooth count alone.

Check the layout against the kerf

A cut removes material, so plan which side of the layout line belongs to the finished piece. Kerf is separate from the blade plate thickness and from the arbor size. Before cutting a full sheet, confirm your setup and edge quality on a representative offcut. The blade, support, and condition of the sheet can all affect the result.

Choose Freud for a dedicated plywood and melamine option, WORKPRO for fine finish across several woods, or Diablo when your saw needs the 6½-inch format.