The best sanding discs for orbital sanders fit the backing pad and cover the grits you need. These three sets are listed as five-inch, eight-hole discs. Two cover common preparation grits, while one starts at 180 grit and runs much finer. Check the hole pattern and attachment type before buying, then decide what surface you need at each stage.
Compare picks by buyer need
| Your priority | Our pick | Why consider it |
|---|---|---|
| Broad grit selection for prep | WORKPRO W124095 150-Piece 8-Hole Sanding Disc Set | Ten listed grades from 60 to 600 in a five-inch, eight-hole assortment. |
| Includes a small supply of 40 grit | POTUINOM SD5-165 Five-Inch Sanding Disc Set | A 165-piece aluminum oxide set with five included 40-grit discs. |
| Fine grits from 180 to 3000 | Rvetol 100-Piece Wet and Dry Sanding Disc Set | A five-inch, eight-hole silicon carbide set with ten pieces per grade. |
WORKPRO W124095 150-Piece 8-Hole Sanding Disc Set
WORKPRO lists 150 aluminum oxide discs with an eight-hole pattern. Compare the pattern with the sander pad to avoid covering its dust ports.
The set includes grades from 60 through 600. Check how the listed grades fit your preparation and finishing sequence before buying.
| Model | W124095 |
|---|---|
| Listed dimensions | Item dimensions L x W x H: 4.92 x 4.92 x 0.1 inches |
| Material | Aluminum Oxide |
| ASIN | B07HHY6MKY |
Pros
- Ten documented grit grades.
Cons
No specific drawback established.
Before you buy: Confirm the pad diameter, backing and hole layout.
Who should choose it?
Choose this set for a range of common preparation and intermediate finishing grits.
View on AmazonPOTUINOM SD5-165 Five-Inch Sanding Disc Set
The POTUINOM set adds five 40-grit discs to an assortment covering common preparation and finer grades. That lets you assess the coarse grade without committing to a large single-grit pack.
The discs have an eight-hole pattern. Check the placement of the dust holes and compatibility with the backing pad before ordering.
| Model | POTUINOM-SD5-165 |
|---|---|
| Material | MIX Grit-165pcs |
| Included accessories | Sanding Discs 40/60/80/120/150/240/320/400/600 Grit * 165pcs |
| ASIN | B0CYPXWNR9 |
Pros
- Includes 40 grit alongside finer grades.
Cons
- Only five discs are listed at 40 grit.
Before you buy: Verify the quantity in the grades you use most.
Who should choose it?
Choose it if you want a mixed pack with a few especially coarse discs.
View on AmazonRvetol 100-Piece Wet and Dry Sanding Disc Set
This Rvetol set starts at 180 grit and includes ten grades through 3000. That makes it a candidate for jobs that call for progressively finer abrasives.
The paper is sold for wet or dry use. Check the directions for the surface and sander separately before choosing a wet application.
| Model | Sanding Disc 5inch 8hole 100pcs 180-3000 |
|---|---|
| Material | Silicone Carbide |
| Included accessories | 100pcs Sanding Discs |
| ASIN | B0D2V2CXWK |
Pros
- Ten discs per grade.
- Includes fine grades through 3000.
Cons
- No grit below 180 in this assortment.
Before you buy: Check whether the machine and application support the intended sanding method.
Who should choose it?
Choose it when the project calls for finer grits and an eight-hole five-inch pad.
View on AmazonOur recommendations use product specifications and package details, rather than hands-on testing. Manufacturer performance claims are not independent measurements. As an Amazon Associate, Benzafind earns from qualifying purchases.
Best sanding discs for orbital sanders by pad fit
Measure the pad and compare its hole pattern with the discs. A five-inch diameter alone does not mean the holes line up. Check that your pad uses hook-and-loop attachment. If the holes miss the dust ports, the disc can cover some of the route for dust. Match the layout before comparing grit range or pack size.
Pick the grits you will actually use
The WORKPRO 150-piece assortment lists ten grits from 60 through 600. The POTUINOM 165-piece assortment lists a small supply of 40 grit in addition to its other grades. If most projects start with an already-smooth surface, consider how much use you will get from very coarse discs. If you prepare rough stock regularly, check whether the package contains enough of the grades you use first.
Keep fine finishing separate from rough prep
The Rvetol set uses silicon carbide and lists ten grits from 180 to 3000. That mix is more focused on finer work than a pack that starts at 40 or 60 grit. The paper is sold for wet or dry use, but the paper's rating alone does not make a powered sander suitable for wet use. Follow the tool manufacturer's instructions.
Compare how you consume the pack
Look at the count for each grade, especially if you use more discs during preparation than during finishing. A high total count can still leave you short in one grade. Clear grit labels also help you avoid jumping to an unintended grade when you move between parts. Check the backing pad, dust extraction setup and the finish instructions before choosing.
Choose WORKPRO for a broad prep assortment, POTUINOM for a pack that also includes 40 grit, or Rvetol for a set concentrated on finer grades.


