3 Best Router Bits for Template Routing

Match cutting height and bearing position to your template. These three router bits cover shallow trimming and taller cuts without assuming every bit fits your setup.

5 min read

Benzafind may earn a commission from purchases through affiliate links, at no additional cost to you.

The best router bits for template routing follow the reference edge and have enough cutting height for the workpiece. This selection includes a half-inch top-bearing bit for taller cuts, a short Amana cutter for shallow work, and a five-piece set for changing patterns. Check where the bearing will run before choosing by cutter size alone.

Compare picks by buyer need

Your priorityOur pickWhy consider it
Half-inch cutter with one inch of carbide heightFreud 50-102 Top-Bearing Flush Trim BitA top-bearing half-inch bit with a quarter-inch shank and two cutters.
Short cutter for shallow template workAmana Tool 45475-S Plunge Template Router BitA three-eighths-inch cutter with a quarter-inch cutting height and two upper bearings.
Mixed cutter sizes for changing patternsTRIMTWOL FXZD1405 Top-Bearing Template Bit SetFive quarter-inch-shank template bits with two listed cutter diameters and several cutting lengths.

Freud 50-102 Top-Bearing Flush Trim Bit

Product overview — B0000225XQ
Product overview — B0000225XQ — Listing illustration.

Freud lists a matching half-inch bearing and cutting diameter. Check that diameter against the tightest inside curve of the pattern.

The bit has one inch of carbide height, which gives it a taller cutting edge than the short Amana option in this guide. Confirm the stock and template relationship before choosing it.

The listed shank is a quarter inch and the bit is documented for handheld and table-mounted routers that accept it.

Key specifications: Freud 50-102 Top-Bearing Flush Trim Bit
Model50-102
MaterialBlend
Included accessoriesTop Bearing Flush Router Bit
FeatureSpecs: Bearing Dia. 1/2", Number of Cutters 2, Overall Dia. 1/2", Overall Length 2-5/8", Shank Dia. 1/4", Carbide Height 1"
FeatureCuts all composition materials, plywoods, hardwoods, and softwoods
ASINB0000225XQ

Pros

  • Documents bearing diameter, cutting height and shank size.

Cons

  • The single cutter has a fixed half-inch diameter.

Before you buy: Check the bearing position and the collet before ordering.

Who should choose it?

Choose it for a recurring half-inch template setup where one inch of cutting height fits the work.

View on Amazon

Amana Tool 45475-S Plunge Template Router Bit

Product overview — B001PTZLAO
Product overview — B001PTZLAO — Listing illustration.

The Amana 45475-S has a three-eighths-inch cutting diameter and a quarter-inch shank. The smaller cutting circle is worth considering where a half-inch bit cannot follow the corner of the pattern.

Amana lists a short quarter-inch cutting height. That documented geometry makes it a candidate for shallow pattern work.

Two upper ball bearings guide the cutter along the reference edge. Verify that the template stays in contact with the bearing in your configuration.

Key specifications: Amana Tool 45475-S Plunge Template Router Bit
Model45475-S
MaterialCarbide
Included accessoriesPower Tool Bit
FeatureDIMENSIONS: 45475-S; 3/8 Diameter x 1/4 Cutting Height x 1/4 Inch Shank with 2 Upper Ball Bearings
ASINB001PTZLAO

Pros

  • Short cutting height suits shallow work.
  • Two documented upper ball bearings.

Cons

  • Quarter-inch cutting height limits the depth covered by the cutting edge.

Before you buy: Check the required template thickness and cutting height for the exact setup.

Who should choose it?

Choose it if the job calls for a shallow cut and the smaller cutter fits the pattern.

View on Amazon

TRIMTWOL FXZD1405 Top-Bearing Template Bit Set

Product overview — B0F3B6X64P
Product overview — B0F3B6X64P — Listing illustration.

The FXZD1405 set lists four half-inch cutters in different lengths and one three-eighths-inch cutter with a half-inch cutting length. This gives a buyer several choices if projects vary in thickness or pattern radius.

The listing identifies top bearings on the two cutter diameters. Confirm the exact combination before selecting a bit for a particular pattern.

All five cutters have quarter-inch shanks. Check the collet and the limits for the individual cutter before fitting it to the machine.

Key specifications: TRIMTWOL FXZD1405 Top-Bearing Template Bit Set
ModelFXZD1405
MaterialTungsten Carbide
Included accessories5*Pattern Router Bit,5* Plastic Storage case,1*Collet Wrench
ASINB0F3B6X64P

Pros

  • Five documented size combinations.
  • Includes half-inch and three-eighths-inch cutter diameters.

Cons

  • Only one of the five bits is listed at three-eighths inch.

Before you buy: Verify the exact bit length and cutter diameter selected from the package.

Who should choose it?

Choose it for a quarter-inch setup when more than one cut length or diameter would be useful.

View on Amazon

Our recommendations use product specifications and package details, rather than hands-on testing. Manufacturer performance claims are not independent measurements. As an Amazon Associate, Benzafind earns from qualifying purchases.

Best router bits for template routing by cutting height

The Freud 50-102 lists one inch of carbide height. The Amana 45475-S lists a quarter-inch cutting height. The TRIMTWOL set supplies several lengths, including a short option and bits up to one inch. Compare the documented cutting height with the depth or thickness you need. Allow for the bearing to stay in contact with the pattern in your specific setup.

Measure the tightest corner in the pattern

The Freud uses a half-inch cutting diameter. The Amana has a three-eighths-inch cutting diameter, and the set includes both diameters. A smaller diameter can follow a tighter inside radius when the bearing and cutter geometry suit the template. Measure the narrowest opening or curve before choosing a cutter. Cutting height and diameter solve different fit problems.

Position the template for the bearing

These options list bearings above the cutting edges on the shank side. Plan where the template sits relative to the router and workpiece so the bearing follows the pattern throughout the cut. Consider the thickness and support of the template as well as the stock. Check the instructions for the bit and router before using either a handheld or table-mounted arrangement.

Decide whether you need a set

A single bit is easier to choose when one size fits the work you repeat. The short Amana suits shallow template work, while the taller Freud suits stock where the extra cutting height is relevant. The TRIMTWOL pack is useful when patterns vary. Confirm the actual bit sizes included and match the shank to the collet before using any cutter.

Choose Amana for its short three-eighths-inch cutter, Freud for a half-inch cutter with one inch of carbide height, or TRIMTWOL for several documented sizes.