Best Drill Bits for Hardened Steel: 3 Sets by Job

Compare the best drill bits for hardened steel by shank fit, working clearance, diameter range and where each of these three sets makes sense.

5 min read

Benzafind may earn a commission from purchases through affiliate links, at no additional cost to you.

The best drill bits for hardened steel depend on the material, the hole diameter and the clearance around the work. These three sets cover distinct needs: spare bits for frequently used diameters, a short hex-shank set, and a range that reaches half an inch. Start by matching the bit to the workpiece and chuck.

Compare picks by buyer need

Your priorityOur pickWhy consider it
Best for spare bits in common sizesCobalt Drill Bits Set for Hardened Metal and Stainless Steel, 99Pcs M35 High Speed Steel Twist Jobber Drill Bits 1/16"-3/8", with Plastic Index Storage CaseThe indexed 99-piece set includes repeats in common smaller diameters, which is useful if you go through the same sizes regularly.
Best for limited clearance5-Piece M35 Cobalt Stubby Drill Bit Set, Sizes 3/32" 1/8" 3/16" 1/4" 5/16" with 1/4" Hex Shank for Stainless Steel & Hard MetalsThe short bits can fit where a taller bit cannot. The hex shank is the key feature to match to your chuck.
Best for a larger maximum diameterM35 Cobalt Drill Bit Set,Three-Flute Design,1/16"-1/2",21pcsThe listed 1/2-inch maximum extends the range beyond the other sets. Check whether the intended chuck can grip the three-flat shank.

Cobalt Drill Bits Set for Hardened Metal and Stainless Steel, 99Pcs M35 High Speed Steel Twist Jobber Drill Bits 1/16"-3/8", with Plastic Index Storage Case

Product overview — B0DB8G4ZKS
Product overview — B0DB8G4ZKS — Listing illustration.

The indexed 99-piece set includes repeats in common smaller diameters, which is useful if you go through the same sizes regularly.

Key specifications: Cobalt Drill Bits Set for Hardened Metal and Stainless Steel, 99Pcs M35 High Speed Steel Twist Jobber Drill Bits 1/16"-3/8", with Plastic Index Storage Case
ModelSKU240321-99pcs
Listed dimensionsItem Dimensions: 7.9 x 7.7 x 1.4 inches
MaterialCobalt Steel
Included accessories99 Drill Bits, 1 Case
FeaturePackaging: Hard and thick plastic box, drills bagged for compartmentalized storage, reasonable design, well secured package
ASINB0DB8G4ZKS

Pros

  • M35 cobalt steel as listed
  • Straight shank
  • 1/16 to 3/8 inch

Cons

  • Stops at 3/8 inch.

Who should choose it?

Best for spare bits in common sizes. The indexed 99-piece set includes repeats in common smaller diameters, which is useful if you go through the same sizes regularly.

View on Amazon

5-Piece M35 Cobalt Stubby Drill Bit Set, Sizes 3/32" 1/8" 3/16" 1/4" 5/16" with 1/4" Hex Shank for Stainless Steel & Hard Metals

Product overview — B09WKBLJ25
Product overview — B09WKBLJ25 — Listing illustration.

The short bits can fit where a taller bit cannot. The hex shank is the key feature to match to your chuck.

Key specifications: 5-Piece M35 Cobalt Stubby Drill Bit Set, Sizes 3/32" 1/8" 3/16" 1/4" 5/16" with 1/4" Hex Shank for Stainless Steel & Hard Metals
ModelNW-21012
Listed dimensionsItem Dimensions: 1.69 x 0.43 x 2.44 inches
MaterialCobalt Steel
Feature【Popular Sizes】Includes imperial sizes: 3/32", 1/8", 3/16", 1/4", 5/16"
ASINB09WKBLJ25

Pros

  • Five sizes
  • 1/4-inch hex shank
  • 1.83 to 2.32 inches overall

Cons

  • Five diameters cover a limited range.

Who should choose it?

Best for limited clearance. The short bits can fit where a taller bit cannot. The hex shank is the key feature to match to your chuck.

View on Amazon

M35 Cobalt Drill Bit Set,Three-Flute Design,1/16"-1/2",21pcs

Product overview — B0FBRY3KCS
Product overview — B0FBRY3KCS — Listing illustration.

The listed 1/2-inch maximum extends the range beyond the other sets. Check whether the intended chuck can grip the three-flat shank.

Key specifications: M35 Cobalt Drill Bit Set,Three-Flute Design,1/16"-1/2",21pcs
ModelCST-SCMHZ
MaterialHigh Speed Steel (HSS)
ASINB0FBRY3KCS

Pros

  • 21 pieces
  • 1/16 to 1/2 inch
  • Three-flat shank as listed

Cons

  • The flute type at overlapping sizes needs confirmation.

Before you buy: Source conflict: The listing gives overlapping size cutoffs for the two- and three-flute bits. Confirm the flute type for the size you need.

Who should choose it?

Best for a larger maximum diameter. The listed 1/2-inch maximum extends the range beyond the other sets. Check whether the intended chuck can grip the three-flat shank.

View on Amazon

Our recommendations use product specifications and package details, rather than hands-on testing. Manufacturer performance claims are not independent measurements. As an Amazon Associate, Benzafind earns from qualifying purchases.

Best drill bits for hardened steel when you need spares

The Sinyeenglon SKU240321-99pcs includes multiples of its smaller bits. That is useful if you drill the same small diameters often or want replacements on hand. The 99 pieces are not 99 distinct diameters. The set tops out at three-eighths of an inch. Choose it when repeat sizes matter more than reaching a larger maximum diameter.

Short bits for limited tool clearance

NordWolfTools lists its NW-21012 bits at 1.83 to 2.32 inches overall. The short format is useful where the drill and bit have to fit into a shallow space. The quarter-inch hex shank suits a compatible chuck or holder, but check the holder specification separately. With only five bit diameters, this is a targeted set for known hole sizes.

A set that reaches half an inch

Crosstar lists 21 bits from one-sixteenth to one-half inch and a three-flat shank design. The half-inch option is the clearest reason to consider it over the other two sets. The seller describes both two- and three-flute bits with overlapping size cutoffs, so confirm the flute design on the exact size you need.

Check material and chuck fit

The listings describe use on hard metals, but compatibility depends on the grade and hardness of the workpiece. Stainless steel and hardened steel are not interchangeable descriptions. Match the chuck to the shank, and distinguish the listed tool dimensions from the hole diameter. The seller claims do not provide a common test of cutting performance across the three sets.

Choose Sinyeenglon for repeated smaller sizes, NordWolfTools for short-bit clearance, or Crosstar if your work needs the larger listed diameter. Check your material and chuck before ordering.