The best circular saw blade for plywood fits your saw and the kind of edge you intend to leave. These three options include two 7¼-inch 60-tooth blades and a smaller 6½-inch 40-tooth blade. Choose by the size your saw is designed for, then compare whether you need a dedicated veneer and melamine option or a blade you will also use on other wood.
Compare picks by buyer need
| Your priority | Our pick | Why consider it |
|---|---|---|
| Dedicated plywood and melamine option | Freud LU79R007 7¼-Inch Plywood and Melamine Blade | A 60-tooth 7¼-inch blade with a 5/8-inch arbor and a listed 0.079-inch kerf. |
| Fine-finish blade for plywood and other woods | WORKPRO W124876AE 7¼-Inch Fine-Finish Blade | A 60-tooth circular saw blade with alternating top bevel carbide teeth and a thin-kerf design. |
| Finish option for a 6½-inch saw | Diablo D0641X 6½-Inch 40-Tooth Finish Blade | A 40-tooth finish blade with a 5/8-inch arbor and plywood among its intended applications. |
Freud LU79R007 7¼-Inch Plywood and Melamine Blade
Freud lists the LU79R007 for plywood and melamine and documents a high alternate top bevel in its specifications. Consider it if a finished veneer or sheet face is important.
The 7¼-inch diameter and 5/8-inch arbor must fit your saw. The 0.079-inch kerf is a separate dimension to check against the machine guidance.
Test the edge on the same type of sheet before committing to a visible piece. Material and support affect how the edge looks.
| Model | LU79R007 |
|---|---|
| Listed dimensions | Product Dimensions: 7.25"L x 7.25"W |
| Material | Blend |
| Included accessories | Ultimate Plywood & Melamine (Thin Kerf) Saw Blade |
| Color | Multi |
| ASIN | B002IPHGA2 |
Pros
- Documents arbor size and kerf.
- Purpose listed for plywood and melamine.
Cons
No specific drawback established.
Before you buy: Confirm the arbor, blade speed and kerf against your saw.
Who should choose it?
Choose it for compatible 7¼-inch saws and plywood or melamine finish cuts.
View on AmazonWORKPRO W124876AE 7¼-Inch Fine-Finish Blade
WORKPRO lists plywood, hardwood, softwood, and trim for the W124876AE. This is an option when a compatible 7¼-inch saw sees more than one type of woodworking material.
The teeth use an alternating top bevel. The maker describes the blade as thin kerf, so confirm the exact kerf if the saw or layout requires a specific width.
Before cutting visible sheet material, use a representative offcut to see how the tooth geometry and setup work together.
| Model | W124876AE |
|---|---|
| Listed dimensions | Product Dimensions: 7.25"L x 7.25"W |
| Material | Alloy Steel, Carbide |
| Included accessories | Circular Saw Blade |
| Color | Black and Red |
| ASIN | B0FMYPHWWC |
Pros
- Lists plywood and solid wood applications.
- 60 carbide-tipped teeth and a documented ATB design.
Cons
No specific drawback established.
Before you buy: Confirm the arbor and exact kerf for the model before purchase.
Who should choose it?
Choose it when your saw uses a 7¼-inch blade and you cut plywood and other wood materials.
View on AmazonDiablo D0641X 6½-Inch 40-Tooth Finish Blade
The D0641X is listed at 6½ inches, so it applies to a different saw size from the two 7¼-inch blades. Match the saw size before comparing tooth counts.
Diablo describes the blade for crosscuts and rips in plywood, hardwood, and softwood. It lists carbide teeth and a thin kerf.
If you need one blade for several materials, test its finish on a representative offcut of the plywood you will use. Check the arbor and other blade limits for the exact saw.
| Model | D0641X |
|---|---|
| Listed dimensions | Product Dimensions: 6.5"L x 6.5"W |
| Material | Metal |
| Included accessories | Blades – Other, Circular Saw Blade, Power Tool Accessories |
| Color | Multi |
| ASIN | B0042U2XFO |
Pros
- 6½-inch option with a documented 5/8-inch arbor.
- Specifically lists plywood among its intended materials.
Cons
No specific drawback established.
Before you buy: Check the 5/8-inch arbor and other saw compatibility requirements.
Who should choose it?
Choose it if you have a compatible 6½-inch saw and want a finish blade for plywood and other woods.
View on AmazonOur recommendations use product specifications and package details, rather than hands-on testing. Manufacturer performance claims are not independent measurements. As an Amazon Associate, Benzafind earns from qualifying purchases.
Best circular saw blade for plywood by diameter
The Freud LU79R007 and WORKPRO W124876AE are listed at 7¼ inches. The Diablo D0641X is a 6½-inch blade. Start with the saw manual rather than assuming those diameters are interchangeable. Confirm the arbor, speed rating, and the permitted kerf before you buy. Check the approved blade installation and guard clearance for the specific saw.
Match the blade to the face that will show
For a visible veneer, the Freud is marketed as a plywood and melamine blade. Its specifications list a high alternate top bevel and a 0.079-inch kerf. WORKPRO describes the W124876AE as a fine-finish wood blade with alternating top bevel teeth and lists plywood among the applications. Use a piece of the same sheet material to judge the edge before cutting a final panel.
Consider what else you cut
The Diablo D0641X lists crosscuts and rips in hardwood, softwood and plywood. That makes it a candidate for someone using a compatible 6½-inch saw on more than sheet goods. The other two are useful to consider if your saw is designed for a 7¼-inch blade. Compare within the blade size your saw takes rather than picking based on tooth count alone.
Check the layout against the kerf
A cut removes material, so plan which side of the layout line belongs to the finished piece. Kerf is separate from the blade plate thickness and from the arbor size. Before cutting a full sheet, confirm your setup and edge quality on a representative offcut. The blade, support, and condition of the sheet can all affect the result.
Choose Freud for a dedicated plywood and melamine option, WORKPRO for fine finish across several woods, or Diablo when your saw needs the 6½-inch format.


