3 Best Cordless Angle Grinders

Compare three bare cordless angle grinders by battery platform and supported disc sizes. Check what you already own before choosing a tool or buying accessories.

5 min read

Benzafind may earn a commission from purchases through affiliate links, at no additional cost to you.

The best cordless angle grinders fit the batteries and grinder accessories you can actually use. This guide covers three bare tools, including a 4½-inch DEWALT and two models listed for both 4½- and 5-inch accessories. Compare the exact wheel, guard and switch requirements for the work you do, rather than assuming an accessory fits because the sizes seem close.

Compare picks by buyer need

Your priorityOur pickWhy consider it
4½-inch bare tool with paddle switchDEWALT DCG413B 4½-Inch Cordless Angle GrinderA 20V MAX tool with a paddle switch, brushless motor, and kickback brake.
M18 bare tool for two listed wheel diametersMilwaukee 2880-20 M18 FUEL Angle GrinderA 4½- or 5-inch grinder with a no-lock paddle, electronic clutch, and 5/8-11 spindle.
DEWALT option for 4½- and 5-inch wheelsDEWALT DCG410B 20V MAX XR Angle GrinderA brushless bare tool with an anti-rotation feature and listed support for 4½- and 5-inch accessories.

DEWALT DCG413B 4½-Inch Cordless Angle Grinder

Product overview — B07457BXJW
Product overview — B07457BXJW — Listing illustration.

DEWALT lists the DCG413B as a 4½-inch grinder. That makes it the smaller listed wheel format in this group, so compare your accessories with the approved size and guard before buying.

The two-stage paddle needs two actions to start. The maker describes a kickback brake that responds to sensed pinch, binding, or stall conditions. Follow the model instructions for the protective features.

The ASIN is tool only. Compare the compatible pack you will use and the included grinder parts before ordering.

Key specifications: DEWALT DCG413B 4½-Inch Cordless Angle Grinder
ModelDCG413B
Listed dimensionsProduct Dimensions: 12.2"L x 4.7"W x 6"H
MaterialMetal, Plastic
Included accessories1) Angle Grinder
ColorMulti
ASINB07457BXJW

Pros

  • Paddle switch and documented kickback brake.
  • Brushless motor.

Cons

  • Battery and charger are separate.

Before you buy: Confirm which guard and wheel types your intended operation requires.

Who should choose it?

Choose it if you already own compatible DEWALT batteries and want a 4½-inch paddle-switch tool.

View on Amazon

Milwaukee 2880-20 M18 FUEL Angle Grinder

Product overview — B09RX4R3TR
Product overview — B09RX4R3TR — Listing illustration.

Milwaukee specifies a no-lock paddle switch and offers a side handle. Compare the switch and handle position with the way you intend to hold the tool.

The 5/8-11 spindle is useful information when checking compatible accessories. Match the wheel, flange, guard and speed requirements against the tool instructions.

The bare tool uses M18 batteries. Check the pack you own and what the package includes before comparing the total setup.

Key specifications: Milwaukee 2880-20 M18 FUEL Angle Grinder
Model2880-20
Listed dimensionsProduct Dimensions: 13"L x 8.5"W x 3.5"H
MaterialMetal
Included accessoriesAngle Grinder
ColorChrome
ASINB09RX4R3TR

Pros

  • No-lock paddle and electronic clutch.
  • Documents spindle size.

Cons

  • Battery and charger are separate.

Before you buy: Confirm the guard and flange for each wheel you plan to use.

Who should choose it?

Choose it for an existing M18 setup if the no-lock paddle and listed wheel sizes suit your work.

View on Amazon

DEWALT DCG410B 20V MAX XR Angle Grinder

Product overview — B0DF84JKVF
Product overview — B0DF84JKVF — Listing illustration.

The DCG410B lists a wider choice of wheel diameters than the DCG413B. The correct wheel still depends on its rating, mounting and guard.

DEWALT describes an anti-rotation system that stops the tool if it detects excessive rotation. Check the documentation for operation and indications specific to this model.

The listing mentions selected dust-extractor and tool-tracking accessories. Those are relevant only if you already use or plan to buy compatible equipment.

Key specifications: DEWALT DCG410B 20V MAX XR Angle Grinder
ModelDCG410B
Listed dimensionsProduct Dimensions: 13.11"L x 6.2"W x 4.9"H
MaterialBlend, Metal
Included accessories(1) DCG410 20V MAX* XR Brushless Cordless 4-1/2 – 5 in. Angle Grinder; (1) 5 in. (125 mm) Type 27 Guard; (1) Side Handle; (1) Wrench; (1) Inner and Outer Flange
ColorBlack, Yellow
ASINB0DF84JKVF

Pros

  • Two listed wheel diameters.
  • Anti-rotation feature.

Cons

  • Battery, charger and optional accessories are separate.

Before you buy: Check the required guard, accessory rating and any separately sold equipment.

Who should choose it?

Choose it if you own compatible DEWALT batteries and need the 4½- or 5-inch setup documented for this grinder.

View on Amazon

Our recommendations use product specifications and package details, rather than hands-on testing. Manufacturer performance claims are not independent measurements. As an Amazon Associate, Benzafind earns from qualifying purchases.

Best cordless angle grinders by battery platform

Both DEWALT options use the 20V MAX system, while Milwaukee lists compatibility with its M18 batteries. All three ASINs are tool-only packages. Check the manufacturer's battery guidance and add the cost of a compatible pack and charger if you need them. The voltage label alone does not tell you how the tool will balance or how long it will run with a particular pack.

Check wheel and guard compatibility

DEWALT lists the DCG413B as a 4½-inch grinder. The Milwaukee 2880-20 and DEWALT DCG410B are listed for 4½- and 5-inch wheels. Compare the spindle or mounting details, the guard required for the accessory, and the permitted speed. Milwaukee lists a 5/8-11 spindle. The tool manual and the accessory label should agree before you use the combination.

Compare the switches and protective features

The DCG413B has a paddle switch and kickback brake. Milwaukee specifies a no-lock paddle switch and electronic clutch. DEWALT describes an anti-rotation feature on the DCG410B. The systems respond to conditions defined by their makers. Choose a switch and handle arrangement that you can control comfortably and follow the model instructions for the fitted wheel and guard.

Decide which extras matter

The DCG410B lists compatibility with selected DEWALT dust-extractor equipment and TOOL CONNECT accessories sold separately. Consider those features only if they fit your actual setup. Compare the three bare tools on the work you need to do, the attachments you already own, and whether you will have to buy a separate setup before the grinder is ready to use.

Choose the DCG413B for a 4½-inch DEWALT setup, the Milwaukee for an existing M18 setup, or the DCG410B for its listed 4½- and 5-inch range on DEWALT.