3 Best Sanding Disc Sets for Orbital Sanders

These five-inch, eight-hole sets cover different grit ranges. See which ones handle common prep work and which set starts finer for later stages of sanding.

4 min read

Benzafind may earn a commission from purchases through affiliate links, at no additional cost to you.

The best sanding discs for orbital sanders fit the backing pad and cover the grits you need. These three sets are listed as five-inch, eight-hole discs. Two cover common preparation grits, while one starts at 180 grit and runs much finer. Check the hole pattern and attachment type before buying, then decide what surface you need at each stage.

Compare picks by buyer need

Your priorityOur pickWhy consider it
Broad grit selection for prepWORKPRO W124095 150-Piece 8-Hole Sanding Disc SetTen listed grades from 60 to 600 in a five-inch, eight-hole assortment.
Includes a small supply of 40 gritPOTUINOM SD5-165 Five-Inch Sanding Disc SetA 165-piece aluminum oxide set with five included 40-grit discs.
Fine grits from 180 to 3000Rvetol 100-Piece Wet and Dry Sanding Disc SetA five-inch, eight-hole silicon carbide set with ten pieces per grade.

WORKPRO W124095 150-Piece 8-Hole Sanding Disc Set

Product overview — B07HHY6MKY
Product overview — B07HHY6MKY — Listing illustration.

WORKPRO lists 150 aluminum oxide discs with an eight-hole pattern. Compare the pattern with the sander pad to avoid covering its dust ports.

The set includes grades from 60 through 600. Check how the listed grades fit your preparation and finishing sequence before buying.

Key specifications: WORKPRO W124095 150-Piece 8-Hole Sanding Disc Set
ModelW124095
Listed dimensionsItem dimensions L x W x H: 4.92 x 4.92 x 0.1 inches
MaterialAluminum Oxide
ASINB07HHY6MKY

Pros

  • Ten documented grit grades.

Cons

No specific drawback established.

Before you buy: Confirm the pad diameter, backing and hole layout.

Who should choose it?

Choose this set for a range of common preparation and intermediate finishing grits.

View on Amazon

POTUINOM SD5-165 Five-Inch Sanding Disc Set

Product overview — B0CYPXWNR9
Product overview — B0CYPXWNR9 — Listing illustration.

The POTUINOM set adds five 40-grit discs to an assortment covering common preparation and finer grades. That lets you assess the coarse grade without committing to a large single-grit pack.

The discs have an eight-hole pattern. Check the placement of the dust holes and compatibility with the backing pad before ordering.

Key specifications: POTUINOM SD5-165 Five-Inch Sanding Disc Set
ModelPOTUINOM-SD5-165
MaterialMIX Grit-165pcs
Included accessoriesSanding Discs 40/60/80/120/150/240/320/400/600 Grit * 165pcs
ASINB0CYPXWNR9

Pros

  • Includes 40 grit alongside finer grades.

Cons

  • Only five discs are listed at 40 grit.

Before you buy: Verify the quantity in the grades you use most.

Who should choose it?

Choose it if you want a mixed pack with a few especially coarse discs.

View on Amazon

Rvetol 100-Piece Wet and Dry Sanding Disc Set

Product overview — B0D2V2CXWK
Product overview — B0D2V2CXWK — Listing illustration.

This Rvetol set starts at 180 grit and includes ten grades through 3000. That makes it a candidate for jobs that call for progressively finer abrasives.

The paper is sold for wet or dry use. Check the directions for the surface and sander separately before choosing a wet application.

Key specifications: Rvetol 100-Piece Wet and Dry Sanding Disc Set
ModelSanding Disc 5inch 8hole 100pcs 180-3000
MaterialSilicone Carbide
Included accessories100pcs Sanding Discs
ASINB0D2V2CXWK

Pros

  • Ten discs per grade.
  • Includes fine grades through 3000.

Cons

  • No grit below 180 in this assortment.

Before you buy: Check whether the machine and application support the intended sanding method.

Who should choose it?

Choose it when the project calls for finer grits and an eight-hole five-inch pad.

View on Amazon

Our recommendations use product specifications and package details, rather than hands-on testing. Manufacturer performance claims are not independent measurements. As an Amazon Associate, Benzafind earns from qualifying purchases.

Best sanding discs for orbital sanders by pad fit

Measure the pad and compare its hole pattern with the discs. A five-inch diameter alone does not mean the holes line up. Check that your pad uses hook-and-loop attachment. If the holes miss the dust ports, the disc can cover some of the route for dust. Match the layout before comparing grit range or pack size.

Pick the grits you will actually use

The WORKPRO 150-piece assortment lists ten grits from 60 through 600. The POTUINOM 165-piece assortment lists a small supply of 40 grit in addition to its other grades. If most projects start with an already-smooth surface, consider how much use you will get from very coarse discs. If you prepare rough stock regularly, check whether the package contains enough of the grades you use first.

Keep fine finishing separate from rough prep

The Rvetol set uses silicon carbide and lists ten grits from 180 to 3000. That mix is more focused on finer work than a pack that starts at 40 or 60 grit. The paper is sold for wet or dry use, but the paper's rating alone does not make a powered sander suitable for wet use. Follow the tool manufacturer's instructions.

Compare how you consume the pack

Look at the count for each grade, especially if you use more discs during preparation than during finishing. A high total count can still leave you short in one grade. Clear grit labels also help you avoid jumping to an unintended grade when you move between parts. Check the backing pad, dust extraction setup and the finish instructions before choosing.

Choose WORKPRO for a broad prep assortment, POTUINOM for a pack that also includes 40 grit, or Rvetol for a set concentrated on finer grades.