Best table saw blade for plywood: Freud LU79R007 vs LU80R010 vs Generic 10-inch 80T

Choosing the best table saw blade for plywood starts with matching the options to your needs. Buying a table saw blade for plywood starts with matching your saw’s diameter and…

6 min read

Benzafind may earn a commission from purchases through affiliate links, at no additional cost to you.

Choosing the best table saw blade for plywood starts with matching the options to your needs. Buying a table saw blade for plywood starts with matching your saw’s diameter and arbor. Higher tooth counts and special tooth grinds aim for chip-free edges on veneer and thin stock, though the finish also depends on your saw and material.

Our picks: best for different buyer needs

We chose these products for different buyer needs, focusing on their functions, setup and everyday upkeep.

Compare picks by buyer need

Your priorityOur pickWhy consider it
Best for 7-1/4-inch table sawsFreud LU79R007: 7-1/4" Thin Kerf Ultimate Plywood & Melamine BladeA thin-kerf 7-1/4-inch blade for veneered plywood and melamine. Confirm the tooth grind before buying: the listing names both Hi-ATB and MTCG.
Best for a 10-inch, 80-tooth option10 Inch 80T Carbide Saw Blade, 5/8 Inch Arbor for Wood CuttingA 10-inch 80-tooth carbide blade for fine-finish cuts in plywood and other wood materials on compatible 10-inch table saws.
Best for 10-inch table sawsFreud LU80R010: 10" Ultimate Plywood & Melamine BladeA 10-inch 80-tooth Hi-ATB blade with laser-cut anti-vibration slots and a grind intended for clean cuts in veneered plywood, melamine and laminates.

Freud LU79R007: 7-1/4" Thin Kerf Ultimate Plywood & Melamine Blade

Product overview — B002IPHGA2
Product overview — B002IPHGA2 — Listing illustration.

Freud markets the LU79R007 for clean cuts in veneered plywood. The listing is inconsistent about the exact tooth grind.

Clean edges reduce sanding and finishing time on visible plywood surfaces.

This benefit applies when cutting plywood, melamine, laminates and similar engineered wood on a compatible 7-1/4-inch table saw.

Check: confirm your table saw accepts a 7-1/4-inch blade with a 5/8-inch arbor before purchase.

Key specifications: Freud LU79R007: 7-1/4" Thin Kerf Ultimate Plywood & Melamine Blade
ModelLU79R007
Listed dimensionsProduct Dimensions: 7.25"L x 7.25"W
MaterialBlend
Included accessoriesUltimate Plywood & Melamine (Thin Kerf) Saw Blade
ColorMulti
ASINB002IPHGA2

Pros

  • Listed for a clean plywood edge
  • Thin kerf reduces blade drag
  • Perma-Shield coating resists pitch and corrosion
  • Freud Limited Tooling Warranty listed

Cons

No specific drawback established.

Before you buy: Check: confirm your table saw accepts a 7-1/4-inch blade before purchase; check product details on Amazon.

Who should choose it?

Choose this if your table saw accepts a 7-1/4-inch blade with a 5/8-inch arbor and you want a blade intended for clean plywood edges; skip it if your saw requires a 10-inch blade.

View on Amazon

10 Inch 80T Carbide Saw Blade, 5/8 Inch Arbor for Wood Cutting

Product overview — B0G48KWSM2
Product overview — B0G48KWSM2 — Listing illustration.

The B0G48KWSM2 uses an 80-tooth carbide-tipped design made for smooth crosscuts and finish cuts.

Higher tooth count helps produce smoother edges in plywood and other wood-based materials.

This benefit applies to compatible 10-inch table saws with a 5/8-inch arbor.

The listing names Generic as the brand and Changxin as the manufacturer.

Key specifications: 10 Inch 80T Carbide Saw Blade, 5/8 Inch Arbor for Wood Cutting
Model255mm-80t-5/8
Listed dimensionsProduct Dimensions: 10"L x 10"W
MaterialTungsten Carbide Tipped Steel
Included accessories1 Tct Saw Blade
ColorSilver
ASINB0G48KWSM2

Pros

  • 80-tooth design helps reduce chipping in plywood
  • Carbide-tipped teeth provide consistent cutting performance
  • Fits many compatible 10-inch miter saws and table saws

Cons

No specific drawback established.

Before you buy: The listing names Generic as the brand and Changxin as the manufacturer. Check: confirm your table saw accepts a 10-inch blade with a 5/8-inch arbor before purchase; check product details on Amazon.

Who should choose it?

Choose this if you need a 10-inch blade for a table saw and want an 80-tooth fine-finish option; skip it if your saw requires a different arbor size or you prefer a named brand with a listed warranty.

View on Amazon

Freud LU80R010: 10" Ultimate Plywood & Melamine Blade

Product overview — B0007WKBEQ
Product overview — B0007WKBEQ — Listing illustration.

The Freud LU80R010 uses an 80-tooth Hi-ATB design with laser-cut anti-vibration slots.

Freud says the slots help control vibration when cutting veneered plywood and melamine.

This benefit applies on compatible 10-inch table saws with a 5/8-inch arbor.

Check: confirm your table saw accepts a 10-inch blade with a 5/8-inch arbor before purchase.

Key specifications: Freud LU80R010: 10" Ultimate Plywood & Melamine Blade
ModelLU80R010
Listed dimensionsProduct Dimensions: 10"L x 10"W
MaterialBlend
Included accessoriesUltimate Plywood & Melamine Saw Blade
ColorMulti
ASINB0007WKBEQ

Pros

  • Freud markets its Hi-ATB tooth design for clean cuts
  • Laser-cut anti-vibration slots reduce vibration
  • Perma-Shield coating resists pitch and corrosion
  • Freud Limited Tooling Warranty listed

Cons

No specific drawback established.

Before you buy: Check: confirm your table saw accepts a 10-inch blade with a 5/8-inch arbor before purchase; check product details on Amazon.

Who should choose it?

Choose this if your table saw accepts a 10-inch blade with a 5/8-inch arbor and you want Freud’s chip-free plywood finish features; skip it if your saw requires a 7-1/4-inch blade.

View on Amazon

Our recommendations use product specifications and package details, rather than hands-on testing. Manufacturer performance claims are not independent measurements. As an Amazon Associate, Benzafind earns from qualifying purchases.

Best table saw blade for plywood — Best for small 7-1/4-inch table saws: Freud LU79R007

This Freud blade fits saws with a 7-1/4-inch diameter and a 5/8-inch arbor. Freud markets it for clean cuts, but the listing names both Hi-ATB and MTCG tooth grinds. Confirm the grind for this model before buying. Freud lists TiCo Hi-Density carbide and a non-stick coating that resists pitch and corrosion. The package contains one blade. Check: warranty coverage is listed only as a limited tooling warranty with no stated duration.

Best for standard 10-inch table saws: Freud LU80R010

The LU80R010 matches 10-inch saws with a 5/8-inch arbor and offers 80 teeth with Hi-ATB grinding. Freud claims laser-cut anti-vibration slots reduce sideways movement for a crisp finish on plywood and melamine. Its full kerf measures .126 inches. The package contains one blade. Check: warranty coverage is listed only as a limited tooling warranty with no stated duration.

Best for 10-inch saws needing an 80-tooth option: Generic 255mm-80t-5/8

This generic 10-inch blade has 80 carbide-tipped teeth and a 5/8-inch arbor, listed for plywood, MDF, hardwood and softwood. The seller says it supports smooth crosscuts and finish cuts, but no brand-specific anti-vibration or coating claims are listed. The package contains one blade. The seller lists compatibility with some 10-inch miter saws and table saws; confirm your saw’s arbor and diameter before buying.

Best when tooth count and coating matter most: Freud LU80R010 or LU79R007

Both Freud blades carry manufacturer claims about TiCo Hi-Density carbide and Perma-Shield coating to reduce drag and pitch buildup. The generic blade does not list those features. Unknowns include country of manufacture, certifications and installation conditions for all three models.

If you run a 7-1/4-inch saw, choose the Freud LU79R007. For a 10-inch saw and documented anti-vibration features, choose the Freud LU80R010. For another 80-tooth 10-inch option, choose the Generic 255mm-80t-5/8 after confirming arbor fit.